Evapo-Rust 5-Gallons of Concentrate (Makes 30-Gallons) Print this pagePrint this page
Evapo-Rust 5-Gallons of Concentrate (Makes 30-Gallons)
Price: $480.00
Our Price: $360.00
You Save: $120.00 (25%)


Availability: Usually ships in 1 to 2 days
Shipping: Can ship only within USA
Weight: 55 lb
Description

EVAPO-RUST CONCENTRATE (MAKES 30-GALLONS)

 

Features

·         All the features of EVAPO-RUST 1-gallon plus

·         Shipped as 5 gallons of concentrate which will yield 30 gallons of premixed solution

·         Ideal for treating large parts or commercial applications

·         Larger size means more product savings

·         Save hundreds on shipping costs.  Only pay to ship the concentrate and not water.

·         Concentrate stores in its 5-gallon container

·         Pour premeasured concentrate and water into a separate container for use

 

Description

Packaged and shipped as 5 gallons of concentrate.  When properly diluted with water, it yields 30 gallons of premixed solution.  Use as much or little as necessary.  Measure the required amount of concentrate and water in a separate container for your needs.  Ideal for applications requiring a larger amount of solution.  By ordering more product, you can save with quantity discounts.  But in addition since you are only paying to ship concentrate and not water, you can save hundreds in shipping costs as well.

 

 

Directions for Use

This product is designed to be mixed with water to make the EVAPO-RUST solution.  In order to mix the proper concentration of finished product, use a clean empty container which is large enough for the amount of product you wish to use.  Mix one part of concentrate with five parts water.  Refer to the directions on the product container for more specific guidelines.  Use as indicated below and keep the concentrate stored in its container for use as necessary. 

 

First clean the part to be treated in order to remove all oil and dirt.  Rinse with water and then immerse the part completely in EVAPO-RUST for about 20 minutes.  Check on the progress throughout.  Once it appears that the rust is removed, take the part out of the solution and rinse with clean water.  If you are satisfied with the results, then dip the product back into the EVAPO-RUST, remove and allow to dry.  This will help to prevent the rust from returning.  For stubborn rust buildup, it may be necessary to store the part in the EVAPO-RUST solution overnight.  Remove and rinse as before.  EVAPO-RUST can be stored in its container and used multiple times until it begins to lose effectiveness.  When you are ready to dispose of the old EVAPO-RUST solution, it is a good idea to filter out the iron content first.  In most cases the remaining solution can be simply poured down the drain.

 

Key Properties

Appearance of product:  Clear to slightly yellowish liquid

Odor:  Contains a slight odor

Foam:  Slight foam

PH at 1% concentration:  6.0 – 7.1

 

Product Availability:  Generally ships within 1 to 2 days after receipt of order

Shipping:  Can only ship within the United States.  No International shipments

Shipping weight:  55 lb


Images

Evapo-Rust30.jpg
Evapo-Rust30.jpg
 



-->
Free PHP Ecommerce Solutions by ViArt