EVAPO-RUST 5-GALLONS (Dehydrated concentrate makes 5-Gallons)
Features (same as EVAPO-RUST 1-gallon plus)
· Perfect for larger parts which require more solution
· Concentrate is packaged in 5-gallon container
· Add water and mix to make the finished product
Same great EVAPO-RUST product but it comes packaged as a concentrate in its own 5-gallong container. Simply add the required amount of water, mix and the product is ready to go. Is perfect for larger parts. And since you only ship the concentrate and not water, it can save on shipping costs.
Directions for Use
Open the container. Add water directly to the container until it is full. Mix until fully blended and use as indicated below.
First clean the part to be treated in order to remove all oil and dirt. Rinse with water and then immerse the part completely in EVAPO-RUST for about 20 minutes. Check on the progress throughout. Once it appears that the rust is removed, take the part out of the solution and rinse with clean water. If you are satisfied with the results, then dip the product back into the EVAPO-RUST, remove and allow to dry. This will help to prevent the rust from returning. For stubborn rust buildup, it may be necessary to store the part in the EVAPO-RUST solution overnight. Remove and rinse as before. EVAPO-RUST can be stored in its container and used multiple times until it begins to lose effectiveness. When you are ready to dispose of the old EVAPO-RUST solution, it is a good idea to filter out the iron content first. In most cases the remaining solution can be simply poured down the drain.
Appearance of product: Clear to slightly yellowish liquid
Odor: Contains a slight odor
Foam: Slight foam
PH at 1% concentration: 6.0 – 7.1
Product Availability: Generally ships within 1 to 2 days after receipt of order
Shipping: Can only ship within the United States. No International shipments
Shipping weight: 15 lb