∑ All the features of EVAPO-RUST 1-gallon
∑ Packaged in a convenient and easy to store 1-quart size
∑ Great for occasional use with smaller parts
Same great EVAPO-RUST product but in a smaller and convenient 1-quart size container. Easy to store under the sink or in the garage. Ideal for smaller parts.
Directions for Use
First clean the part to be treated in order to remove all oil and dirt. Rinse with water. Pour the EVAPO-RUST into a plastic bucket or small tub. Then immerse the part completely in EVAPO-RUST for about 20 minutes. Check on the progress throughout. Once it appears that the rust is removed, take the part out of the solution and rinse with clean water. If you are satisfied with the results, then dip the product back into the EVAPO-RUST, remove and allow to dry. This will help to prevent the rust from returning. For stubborn rust buildup, it may be necessary to store the part in the EVAPO-RUST solution overnight. Remove and rinse as before. Carefully pour the EVAPO-RUST back into its container using a large funnel so that it can be used multiple times until it begins to lose effectiveness. When you are ready to dispose of the old EVAPO-RUST solution, it is a good idea to filter out the iron content first. In most cases the remaining solution can be simply poured down the drain.
Appearance of product: Clear to slightly yellowish liquid
Odor: Contains a slight odor
Foam: Slight foam
PH at 1% concentration: 6.0 Ė 7.1
Product Availability: Generally ships within 1 to 2 days after receipt of order
Shipping: Can only ship within the United States. No International shipmentsShipping weight: 5 lb